Cobra P20E Manual de Instruções Página 8

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 16
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 7
8 / Instruction Manual
2.2 Before using the pole saw
2.3 When using the pole saw
Study this manual thoroughly
Familiarise yourself with the operation of the pole saw and learn to use it properly.
Never allow others (especially children) who have not read the manual to use the
machine.
If the unit must be given to other people, give them this manual to study
Never remove the labels or security elements.
Check that the voltage and frequency indicated on the nameplate affixed to the
electric pole saw correspond to the power electricity supply.
Check the oil level before each use. Never use the pole saw without oil in the tank or
when the amount of oil is low.
Check the condition of the guide bar, saw chain, fasteners and safety
components before each use. Replace excessively worn or missing parts.
Do not turn on the machine if the chain side cover is not installed or when the guide
bar is damaged or missing.
To connect the machine to the power supply, use only appropriate and compliant
equipment in perfect condition.
Keep cord away from the radius of action of the saw and make sure it is not
subjected to tension. Move the cable away from water, heat and sharp edges.
Do not cut near other electrical equipment. Do not put force on the power cable.
Never use the cord for carrying, pulling or unplugging the machine.
Do not use the machine if the Power On / Off does not work properly. If necessary,
contact your dealer for any repair.
Never expose the electric pole saw to rain or moisture. Never allow water or other
liquids to enter the machine.
Do not operate the electric pole saw in environments with flammable items such as
liquids, gases or dust. The sparks generated by the operation of the machine can
cause an explosion.
Do not start cutting until the work area is clear and cleaned properly. Keep the work
area clean and tidy to reduce the risk of accidents.
During the first use, it is recommended that the user be accompanied by a
person experienced using pole pruning saws.
Operate the electric pole saw only in daylight or good artificial lighting.
The use of power equipment can be regulated. Remember to comply with legal
regulations which may differ from one location to another.
Do not use the machine if you are tired or ill. Also avoid use if you have consumed
alcohol or taken drugs. A moment of inattention can result in serious injury.
Wear close-fitting clothing of good quality to help protect yourself from cuts. Always wear long
trousers, sturdy non-slip shoes, and protective equipment such as gloves,
goggles, a helmet with a visor and acoustic shield.
Make sure the trigger switch is turned off before connecting the electric pole saw plug
Vista de página 7
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comentários a estes Manuais

Sem comentários