Cobra C6 Especificações descarregar pdf (Página 11)

Griddle

These griddles are fitted with a pilot as a standard

option and Flame Failure Protection, which is

incorporated by way of a thermo-electric system for

each main burner. Flame Failure Protection will shut

off the gas supply to that burner in the event that

the pilot for that burner goes out, so that un-burnt

gas is not expelled. This is an important safety

feature which is slowly becoming law throughout

the world.

Lighting the Griddle

a. Depress the gas control knob and rotate anti-

clockwise to the ‘PILOT’ position.

b. With the gas control knob depressed, press the

piezo ignition button to ignite the pilot burner.

Repeat Items 1 to 2 until the pilot is lit.

c. Release the gas control knob approximately 10

to 20 seconds after lighting the pilot.

d. The pilot should now remain alight - if not, repeat

Steps (a to (c above.

e. ‘Full Flame’ can now be achieved by depressing

and rotating the gas control knob anti-clockwise

to the first stop.

f. Low flame can be achieved by depressing the

gas control knob and rotating fully anti-

clockwise to the ‘Low Flame’ position.

g. When the main burner is not required, depress

and turn the gas control knob clockwise back to

the ‘PILOT’ ‘OFF’ position.

h. To turn 'Off' the main burner, depress and turn

the gas control knob clockwise back to the

‘OFF’ position. The pilot will extinguish.

Part 4 Operation

Open Burners

NOTE:

Only cooking pans from size Ø 150 mm to Ø 420

mm are suitable fo use on these open burners.

Lighting the Open Burners

(Flame Failure Protection is incorporated as

standard for the UK Market and optional for Non -UK

Markets, for each burner by way of a thermo-

electric system which will shut off the gas supply to

that burner in the event that the burner goes out, so

that un-burnt gas is not expelled).

a. Select the burner required, depress and turn the

corresponding gas control knob anti-clockwise

to the ‘HIGH’ position.

b. With the gas control knob depressed, manually

light the burner.

c. Release the gas control knob after

approximately 10-20 seconds after lighting the

burner.

d. The burner should stay alight - if not, repeat

Steps (a to (c above.

e. To achieve simmer control, depress the gas

control knob and rotate between the ‘HIGH’

and ‘LOW’ positions to achieve the temperature

required.

Turning 'OFF' the Open Burners

a. When the main burner is not required, depress

and turn the gas control knob clockwise back to

the ‘OFF’ position. The 'MAIN' burner will

extinguish.

AUTION

The griddle plate temperature reaches over

300°C in hottest points during normal

operation at 'Full Flame' setting.

Should any abnormal operation like;

- ignition problems,

- abnormal burner flame,

- burner control problems,

- partial or full loss of burner flame in normal

operation,

be noticed, the appliance requires IMMEDIATE

service by a qualified service person and shall not

be used until such service is carried out.

IMPORTANT

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 20 21

Comentários a estes Manuais

Sem comentários

Cobra C6 Especificações Página 11

Comentários a estes Manuais

Manuais e produtos relacionados com Fogões Cobra C6