Cobra C6 Especificações descarregar pdf (Página 5)

NOTE: (*)

* - The burner operating pressure is to be measured

at the manifold test point with two burners

operating at full setting. The operating pressure

is ex-factory set, through the appliance regulator

and is not to be adjusted, apart from when

carrying out gas conversion, if required. (Refer

to the ‘Gas Conversion Instruction Sheet’ for this

appliance for further details).

Gas Connection

Gas supply connection point is located at the rear

of the appliance, approximately 130 mm from the

right hand side and 630 mm from the floor. It is

reached from beneath the appliance. (Refer to the

‘Dimensions’ section).

Connection is ¾" BSP male thread (for all models).

Part 2 Specifications

Model Covered in this Specification -

C6D [1] Cooktop 4 Open Burners.

C6C [1] Cooktop 2 Burners + 300mm Griddle.

C6B Cooktop 600mm Griddle.

C9D [1] Cooktop 6 Open Burners.

C9C [1] Cooktop 4 Burners + 300mm Griddle.

C9B [1] Cooktop 2 Burners + 600mm Griddle.

C9A Cooktop 900mm Griddle.

[1] - Open Burner Options:-

F - With Flame Failure Protection.

- Standard Burners.

General

A heavy duty, high efficiency Cooktop for modular

kitchens. It has a high option Cooktop / Griddle

arrangement and is available on adjustable front

feet and robust rear rollers. Five griddle options with

2 models of base unit are available. Fitted with

'Individual Flame Failure' Option (F) for each open

burner. (Standard for UK - Optional for Non UK)

Griddles are fitted with pilot, flame failure and piezo

ignition as standard. These cooktops have an easy

clean stainless steel external finish.

Gas Supply Requirements

- Non - UK Only:

- UK Only:

Natural Gas

(G20)

Propane

(G31)

Open Burner

(each)

Griddle

(each 300mm

section)

Open Burner

(each)

Griddle

(each 300mm

section)

Heat Input (net)

Nominal

5.0 kW 5.0 kW 4.6 kW 5.0 kW

Reduced

1.7 kW 1.5 kW 1.5 kW 2.2 kW

Gas Rate (net)

Nominal

0.53 m

/hr 0.53 m

/hr 0.36 kg/hr 0.39 kg/hr

Reduced

0.18 m

/hr 0.16 m

/hr 0.12 kg/hr 0.17 kg/hr

Supply Pressure

20 mbar 37 mbar

Burner Operating Pressure

10 mbar (*)

Gas Connection

¾” BSP Male

28 mbar (*)

Natural Gas LP Gas (Propane)

Open Burner

(each)

Griddle

(each 300mm

section)

Open Burner

(each)

Griddle

(each 300mm

section)

Input Rate (N.H.G.C.)

22 MJ/hr

(20,000 Btu/hr)

20 MJ/hr

(18,956 Btu/hr)

22 MJ/hr

(20,000 Btu/hr)

20 MJ/hr

(18,956 Btu/hr)

Supply Pressure

1.13 - 3.40 kPa

(4.5” -13.5” w.c.)

2.75 - 4.50 kPa

(11” -18.0”w.c.)

Burner Operating Pressure

1.0 kPa (*)

(4.0” w.c.)

2.6 kPa (*)

(10.0” w.c.)

Gas Connection

¾” BSP Male

1 2 3 4 5 6 7 8 9 10 ... 20 21

Comentários a estes Manuais

Sem comentários

Cobra C6 Especificações Página 5

Comentários a estes Manuais

Manuais e produtos relacionados com Fogões Cobra C6