Cobra GPS 500 Guia do Utilizador descarregar pdf (Página 41)

www.gpssource.com

+1 719-561-3680

The WarFighter Source for GPS Retransmission Systems Page 41 of 102

Document Class/Number:

DOC-UMN-AAA-AD

GLI-COBRA USERS MANUAL Revision: 001F

Step

Instruction

10.0

Connect Output Cable:

Unscrew the RF load(s) on the output(s) (J2,

J3, J4 or J5) that will be used.

All unused outputs must have the loads

attached or the SC will indicate faults when

the unit is powered on.

Connect the green TNC(M) 30ft RF cable to

the green SC output connector with the

removed load (J2, J3, J4 or J5).

Once more ensure all loads are on the unused

outputs.

11.0

Install Transmit Antenna:

Attach the transmit antenna hinge mount, and

velcro mounting plate using the knob

fasteners. The velcro patch should be facing

opposite the antenna.

If the 3ft cable is not already connected to the

antenna, then connect the 3ft SMA(m) green

cable end to the transmit antenna. (not shown

in photo)

Output

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 101 102

Sem comentários

Cobra GPS 500 Guia do Utilizador Página 41