
www.gpssource.com
+1 719-561-3680
The WarFighter Source for GPS Retransmission Systems Page 81 of 102
Document Class/Number:
DOC-UMN-AAA-AD
GLI-COBRA USERS MANUAL Revision: 001F
Brightness
Level
Adjustment
Used to adjust
the illumination
intensity of the
front panel of
the unit.
NOTE: Depressing the down button beyond its lowest setting
will turn off the user input panel lights; however, the unit will still
operate.
Used to insert
cable offset in
the event longer
cables are
used, the unit
can
compensate for
the cable loss.
CABLE OFFSET: Pressing and holding the BRT UP and BRT
DN buttons simultaneously for 3 seconds allows user to enter
additional system gain to offset loss cables between the Signal
Conditioner and the transmit antenna.
“CBL OS:#” is displayed
Use the BRT buttons to select desired setting
0 = no additional gain
1,2,3,4 or 5 = 1, 2, 3, 4, or 5 dB additional gain
3 seconds after last button press, the input is accepted and
system returns to normal operating mode
7.2 L2 Offset Mode
The unit can be set to lower its L2 signal in rare instances where the unit is oscillating on the L2 channel.
In rare instances, L2
offset mode is useful as
it may improve system
performance if there is
less system gain on L2.
L2 signal is still
available for use with
offset.
L2 OFFSET: Pressing and holding the BRT DN
and LVL UP buttons simultaneously for 3 seconds
allows user to change the offset between L1 and
L2 signal
“L2OS:-#”
LVL buttons select desired setting
0 = no offset between L1 and L2 signals
-5 (default) = L2 signal is -5dB
-10 = L2 signal is -10dB
3 seconds after last button press, the input is
accepted and system returns to normal operating
Comentários a estes Manuais